Proteor Group > Home > Orthotics > Upper Extremity Orthotic Components > Low Temperature Thermoplastic Sheets
>Turbocast, for finger and wrist splints PL16016 - Turbocast, for finger and wrist splints
- Can be shaped easily.
- Can be worked with hot water or with a heat gun.
- Perfectly matches the patient's shapes.
- Good weldability.
- Lightweight and resistant.
- Can be used on a model or directly on the patient who has been previously protected with Jersey.
> For finger and wrist splints
Legal DisclaimersLinksSite MapTrainingArchive © 2008 PROTEOR - All rights reserved - Reproduction, in whole or in part, is strictly prohibited.